New pages

15:0415:04, 15 April 2026 Notes on Reservation (hist | edit) [1,075 bytes] Arin2 (talk | contribs) (Created page with "* '''Plasma Chamber''' does not require reservations. Assumption is that usage will be a short time prior to wire bonding or die attach. For experiment which will take longer than 15minutes, contact Protofab staff. * '''Ovens''' do not require reservation. They can be shared as long as cure profile matches your application. * UV cure systems are part of Manual Assembly Station and can be reserved through...") Tag: Visual edit
14:1514:15, 15 April 2026 Protofab Job Postings (hist | edit) [64 bytes] Arin2 (talk | contribs) (Created page with "== Current Protofab Openings == " No open position". Stay Tuned!") Tag: Visual edit

15:4315:43, 13 April 2026 Photonics WB and Facet Attached Optics Fabrication (hist | edit) [91 bytes] Arin2 (talk | contribs) (Created page with "Protofab is actively engaged with vendors, and this page will be updated upon finalization.") Tag: Visual edit
15:4015:40, 13 April 2026 Photonics WB and surface-attached Optics Fabrication (hist | edit) [105 bytes] Arin2 (talk | contribs) (Created page with "Note: Protofab is actively engaged with such system vendors. This page will be updated upon finalization.") Tag: Visual edit

09:3009:30, 9 April 2026 Manual Assembly Station (hist | edit) [2,983 bytes] Arin2 (talk | contribs) (Created page with "== About == This station is setup for high-precision alignment and bonding of components manually. There are 3 manual assembly station that can be used as visual inspection as well. One is equipped with camera (coupled to microscope) to project the view on a monitor for training or demo purposes. == Setups == * '''Stereozoom Microscope:''' For visual inspection and component alignment. ** Leica S7 E (Assembly #1) ** :File:Leica S-S...") Tag: Visual edit
08:2908:29, 9 April 2026 Brian Thibeault (hist | edit) [969 bytes] Arin2 (talk | contribs) (Created page with "{{staff|{{PAGENAME}} |position = Technical/Operational Director |room = 1109D |phone = (805) 893-2268 |cell = |email = thibeault@ece.ucsb.edu }} =About= Brian received his Ph.D from UCSB in 1997 working on MBE growth, design, fabrication, and testing of GaAs-based oxide-apertured VCSELs under Prof. Larry Coldren. Afterwards, he helped start WideGap Technology, LLC, which became Nitres, Inc., which was purchased by CREE in June of 2000. There he was a key member of th...") Tag: Visual edit
08:1408:14, 9 April 2026 Staff List (hist | edit) [1,337 bytes] Arin2 (talk | contribs) (Created page with "See the [https://www.nanotech.ucsb.edu/staff Contact Page] for who to contact for different requests. ==Financial & Administrative== For questions regarding lab access or capabilities, please contact the Lab Director. {| class="wikitable" style="border: 1px solid #D0E7FF; background-color:#ffffff; text-align:left; font-size: 95%" border="1" |- bgcolor="#D0E7FF" ! width="150" bgcolor="#D0E7FF" align="center" |'''Name''' ! width="250" bgcolor="#D0E7FF" align="center" |'''...") Tag: Visual edit

16:5016:50, 8 April 2026 Fabrication Services (hist | edit) [9,950 bytes] Arin2 (talk | contribs) (Created page with "Category:Services ''Procedures and paperwork to get '''your students/employees''' into the NanoFab.'' ''If you are looking for '''fabrication services by NanoFab staff''', please see [https://wiki.nanotech.ucsb.edu/wiki/Services#Fabrication_Services_by_NanoFab_Staff this section].'' ''Hourly rates can be found on [https://www.nanotech.ucsb.edu/services#comp-k3rx7hk4 this page].'' Please choose the appropriate section: __TOC__ <!-- Table of Contents here, forced...") Tag: Visual edit

13:5313:53, 3 April 2026 Recipes: UV Curing (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:5113:51, 3 April 2026 Recipes: Thermal Process (Bake) (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:4813:48, 3 April 2026 Recipes: Plasma Treatment (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:4413:44, 3 April 2026 Recipes: Application Specific Metrology (hist | edit) [999 bytes] Arin2 (talk | contribs) (Created page with "== Application Specific Quick Start Guides == Profile Measurements Average Step Height Measurement (Flatness) Gathering New Film Thickness Data Surface Roughness Measurement Volume & Area Measurement Plane Measurement Process Image Batch Analysis Recommendation Comparative Measurement Gathering New Data using Laser Confocal Teaching Module") Tag: Visual edit
13:3913:39, 3 April 2026 Recipes: Die Shear and wire Pull Tester (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:3213:32, 3 April 2026 Photonics Wire Bond and Surface Attached Lens Fabrication (hist | edit) [203 bytes] Arin2 (talk | contribs) (Created page with "== About == [https://www.vanguard-automation.com/sonata1000/ PWB 3D Lithography] [https://www.vanguard-automation.com/reprise1000/ PWB Pre-Post Processing] == Recipes == Recipes: PWB 3D Lithography") Tag: Visual edit
13:2513:25, 3 April 2026 Recipes: PWB 3D Lithography (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:1913:19, 3 April 2026 Recipes: Optical Alignment and Attach (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:1413:14, 3 April 2026 Recipes: Wire Bonding (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:1113:11, 3 April 2026 Recipes: Fluid Dispensing (hist | edit) [19 bytes] Arin2 (talk | contribs) (Created page with ""Under Development"") Tag: Visual edit
13:0513:05, 3 April 2026 Recipes: Flip-Chip and Die Bonding (hist | edit) [18 bytes] Arin2 (talk | contribs) (Created page with ""Work in Progress"") Tag: Visual edit
11:5911:59, 3 April 2026 Directions (Map) (hist | edit) [164 bytes] Arin2 (talk | contribs) (Created page with "[https://maps.app.goo.gl/NJUearq6RRFTL5HX8 Google Map] none|thumb|Protofab is located @ 71 S. Los Carneros Rd. Goleta, CA 93117") Tag: Visual edit

11:5311:53, 2 April 2026 Stereozoom Microscopes (hist | edit) [769 bytes] Arin2 (talk | contribs) (Created page with "== About == Several stereozoom microscopes are available in the facility as visual aid during manual assembly or post process inspection. One setup will have a camera to be used for training (attached to a monitor) or documentation (attached to a PC/Laptop). Please note for accurate, high resolution and large-scale (stiched) documentation the metrology microscope may be a better fit.") Tag: Visual edit
11:0311:03, 2 April 2026 Plasma Treatment (Glen Technologies, Yield Engineering, R3A Asher) (hist | edit) [2,766 bytes] Arin2 (talk | contribs) (Created page with "== About ==") Tag: Visual edit
09:5609:56, 2 April 2026 Bake Chamber (Yamato DKN Series Forced Convection Ovens) (hist | edit) [2,968 bytes] Arin2 (talk | contribs) (Created page with "== About == The Yamato DKN series are line of forced convection constant temperature drying ovens designed for high-precision heating and drying applications. == Application == The DKN series is primarily used for: * '''Industrial Processing:''' Heat treatment (curing) of various material within a temperature up to '''260°C'''. * '''Product Testing:''' Constant temperature experiments requiring precise thermal control such as "High Temperature Storage" or "Burn-In"....") Tag: Visual edit
09:0409:04, 2 April 2026 Automated alignment and Attach (Fiberpro IFA-600-AUCME3) (hist | edit) [3,671 bytes] Arin2 (talk | contribs) (Created page with "none|thumb|'''Fiberpro IFA600''' == About == IFA-600-AUCME3 (hereinafter, IFA-600) is an automatic alignment, bonding (adhesive based) and test system for optical devices. == Application == ===== Device Assembly/Test using the active alignment w/ the optical signal ===== In these cases, a light source is being coupled to the device and output is captured, measured by optical power meter and used as feedback signal for alignment. File:Fib...") Tag: Visual edit

08:3208:32, 1 April 2026 UV Curing System (Panasonic Aicure UJ35 UV LED Spot Cure) (hist | edit) [3,571 bytes] Arin2 (talk | contribs) (Created page with "== About == == Application == == System Overview == == Operating Procedure & User's Manuals == Panasonic Aicure UJ35 UV LED Spot Cure SOP == Recipes == "Under Development"") Tag: Visual edit

17:2517:25, 31 March 2026 Precision Fluid Dispensing (Nordson EFD Ultimus I/II) (hist | edit) [3,847 bytes] Arin2 (talk | contribs) (Created page with "== About == none|thumb|Nordson EFD Dispenser Nordson EFD Ultimus I-II are high-precision benchtop fluid dispensing control for advanced applications of epoxy, silicones, sealants, glues, greases, cyanoacrylates, solder pastes, and other assembly fluids dispensed with syringe barrels. Featuring a digital display of all fluid dispenser settings and time adjustment as fine as 0.0001 seconds, Ultimus I-II dispensers bring exceptional contro...") Tag: Visual edit
12:1312:13, 31 March 2026 Chemicals & MSDS (hist | edit) [4,271 bytes] Arin2 (talk | contribs) (Created page with "'''Facility Users are responsible for understanding the dangers and safety of the chemicals they use!''' You must take the time to look at the Material Safety Datasheets for the chemicals you are exposed to. If you would like to know if you can bring a new chemical into the cleanroom, please contact the [mailto:arin_abed@ucsb.edu Facility Manager]. === Stocked Chemicals at Protofab === To view Material Technical or safety Data Sheet, click on "'''TDS" or SDS respective...") Tag: Visual edit
10:4610:46, 31 March 2026 MSDS (hist | edit) [753 bytes] Arin2 (talk | contribs) (Created page with "'''Facility Users are responsible for understanding the dangers and safety of the material they use!''' You must take the time to look at the Material Safety Datasheets for the chemicals you may be exposed to. If you would like to know if you can bring a new chemical into the cleanroom, please contact the [mailto:arin_abed@ucsb.edu Facility manager]. === Material Inventory === {| class="wikitable sortable mw-collapsible mw-collapsed" |+ !Material !Type !Description !Ve...") Tag: Visual edit

15:5215:52, 30 March 2026 3D Profiling and Surface Roughness (Keyence VK-X3000 Confocal Microscope) (hist | edit) [4,413 bytes] Arin2 (talk | contribs) (Created page with "== About == none|thumb|271x271px|Keyence VK-X3000 Confocal Microscope The Keyence Digital Microscope is used in Protofab to perform high-resolution optical inspection, dimensional measurement, surface characterization, and documentation of micro- and opto-electronic devices and components. == Application == * Die attach inspection (epoxy, eutectic, or solder joints) * Wire bond inspection (ball, wedge, stitch, stud bumps) * Optical alignme...") Tag: Visual edit
12:0412:04, 30 March 2026 Die Shear and wire Pull Tester (F&S 5600i Pull/Shear Tester) (hist | edit) [4,591 bytes] Arin2 (talk | contribs) (Created page with "== About == none|thumb|300x300px|'''F&S 5600Ci Wire Pull and Die Shear Tester''' The F&S 5600i die shear and wire pull testing tool is used to evaluate quality of wire bond or die attach process for microelectronic, optoelectronic, and hybrid devices. It has interchangeable modules to measure small die/ball or large die shear strength as well as wire pull force. Results can be analyzed and output immediately or exported in a number...") Tag: Visual edit
08:4908:49, 30 March 2026 Ball & Wedge Bonding (F&S 56i Wire Bonder) (hist | edit) [4,336 bytes] Arin2 (talk | contribs) (Created page with "== About == left|thumb|300x300px|F&S 56i Bonder and Heads") Tag: Visual edit

15:0815:08, 26 March 2026 Flip-Chip and Die Bonder (Tresky T-5300-W) (hist | edit) [3,797 bytes] Arin2 (talk | contribs) (Created page with "== About == Tresky T-5300-W is a die bonder and component placer with motorized and programmable Z-axis, making it extra useful for repetitive processes in small-scale production, where operator influence must be minimized. The T-5300-W really shines in applications with highest precision requirements, such as flip-chip or laser diode placement. A high-resolution beam splitter unit allows sub-micron placement accuracy. The T-5300-W features up to a 200mm wafer table whi...") Tag: Visual edit
10:0210:02, 26 March 2026 Equipment List (hist | edit) [1,233 bytes] Arin2 (talk | contribs) (First Draft) Tag: Visual edit

17:2117:21, 25 March 2026 FAQ (hist | edit) [5,805 bytes] Arin2 (talk | contribs) (First Draft) Tag: Visual edit
10:1410:14, 25 March 2026 Protofab Rules (hist | edit) [21,740 bytes] Arin2 (talk | contribs) (Created page with "=== Summary === While working in the OASIS Prototyping facility, Protofab, you are surrounded by electro-mechanical systems, gases and chemicals. It is impossible to define a policy for every conceivable situation. '''The responsibility lies with users and staff to act in a professional, courteous, and safe manner at all times while in the facility.''' The Protofab culture relies on self-discipline to follow policies, respect for each other, and careful considerate trea...") Tag: Visual edit

15:3415:34, 24 March 2026 Facility Rules (hist | edit) [0 bytes] Vraj (talk | contribs) (Created page with "'''1. If you didn’t log it, it didn’t happen.''' Tool usage, parameters, issues—everything goes in the log. No exceptions. '''2. Never “just try something.”''' This isn’t a kitchen. Random tweaks = ruined wafers + pissed-off users. '''3. Respect the tool more than your timeline.''' Rushing = contamination, downtime, and everyone hates you. '''4. Clean as if the next user is your boss.''' Because sometimes they are. '''5. Don’t touch anything you wer...") Tag: Visual edit
15:3215:32, 24 March 2026 SOPs (hist | edit) [88 bytes] Vraj (talk | contribs) (Created page with " === '''list of Tools''' === * New Tool * Keyence VK X3000") Tag: Visual edit
15:0015:00, 24 March 2026 New Tool (hist | edit) [4,743 bytes] Vraj (talk | contribs) (Added new tool) Tag: Visual edit

15:3815:38, 23 March 2026 SOP Keyence VK X3000 (hist | edit) [6,647 bytes] Vraj (talk | contribs) (Add Raw DOCX data) Tag: Visual edit

New pages

15 April 2026

13 April 2026

9 April 2026

8 April 2026

3 April 2026

2 April 2026

1 April 2026

31 March 2026

30 March 2026

26 March 2026

25 March 2026

24 March 2026

23 March 2026