Thermal Cure
Bake Recipes
The following are recommended cure times and temperatures based on manufacturer's technical data sheet information. For UV and heat curing materials, do UV initial tack before thermal bake for full crosslink.
| Material | Recommended Cure (Temp°C/Time) | Alternate 1 | Alternate 2 | Alternate 3 | Initial Tack |
|---|---|---|---|---|---|
| HYB-353ND | 100°C/30 min | 150°C/30 min | 80°C/ 1 hour | 100mW/cm2 for 1min | |
| H70E | 150°C/1 hour | 120°C/30min | 100°C/1 hour | ||
| H20E | 150°C/1 hour | 80°C/3 hours | |||
| GA700H | 100°C/1 hour | 150mW/cm2 for 2 min | |||
| 3553-LV-UTF_HM | 110°C/1 hour | 1000mW/cm2 for 30 sec | |||
| CHIPSHIELD 2401 | 110°C/1 hour | 1000mW/cm2 for 30 sec | |||
| OPTOCAST 3410 | 110°C/1 hour | 1500mW/cm2 for 30 sec |