UV Curing: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
mNo edit summary |
mNo edit summary |
||
| Line 45: | Line 45: | ||
|GA700H |
|GA700H |
||
|150 mW/cm2 |
|150 mW/cm2 |
||
| |
|10% |
||
|120 sec |
|120 sec |
||
|25mm |
|25mm |
||
Latest revision as of 12:03, 31 August 2026
Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.
UV Curing Recipes
Recipes for hybrid materials are for initial tack only. UV exposure and heat cure will typically be needed for 100% crosslink.
| Material | Supplier's Recommended
UV Intensity |
Controller Output | Time | LED Distance From Sample | Additional Heat Cure(Temp°C/Time) |
|---|---|---|---|---|---|
| OG116-31 | 100% | 330 sec | 1cm | ||
| HYB-353ND | 100mW/cm2 | 100% | 60 sec | 1cm | 100°C / 30 min |
| 3553-LV-UTF_HM | 1000mW/cm2 | 100% | 60 sec | 1cm | 120°C/30 min |
| OPTOCAST 3410 | 1500 mW/cm2 | 100% | 60 sec | 1cm | 110°C/ 60 min |
| GA700H | 150 mW/cm2 | 10% | 120 sec | 25mm | 100°C/ 60 min |