Revision as of 15:38, 23 March 2026 view source Vraj (talk \| contribs) Bureaucrats, Interface administrators, Administrators 34 edits Add Raw DOCX data Tag: Visual edit		Revision as of 15:47, 23 March 2026 view source Vraj (talk \| contribs) Bureaucrats, Interface administrators, Administrators 34 edits Test the Index Tag: Visual edit Newer edit →
Line 18: Users may be held responsible for repair, cleaning, or downtime costs only in cases of negligence or repeated misuse. # '''Purpose''' The Keyence Digital Microscope is used in Protofab to perform high-resolution optical inspection, dimensional measurement, surface characterization, and documentation of micro- and opto-electronic devices and components. The system supports process development, in-process verification, failure analysis, and final inspection across research, prototyping, and low-volume manufacturing activities.▼ ~~# '''Purpose'''~~ # '''Scope''' This SOP applies to all uses of the Keyence microscope for non-destructive inspection and metrology of parts, assemblies, and substrates processed within Protofab. The microscope is intended for room-temperature, dry inspection only and shall not be used for live electrical probing, destructive testing, or chemical exposure.▼ ~~== 2.~~# Safety & EHS ==▼ ▲The Keyence Digital Microscope is used in Protofab to perform high-resolution optical inspection, dimensional measurement, surface characterization, and documentation of micro- and opto-electronic devices and components. ## PPE such as protective eyewear is mandatory except while using microscope eyepieces. Refer to facility rules for details.▼ ## Do not stare at the LED light or reflected beam.▼ ~~The system supports process development, in-process verification, failure analysis, and final inspection across research, prototyping, and low-volume manufacturing activities.~~ ## Do not touch the lens revolver while it is moving. Doing so risks catching hands or fingers in the mechanism.▼ ## Do not place your hand between the stage and the unit. Doing so may result in your hand getting caught and subsequent injury.▼ ~~# '''Scope'''~~ ▲This SOP applies to all uses of the Keyence microscope for non-destructive inspection and metrology of parts, assemblies, and substrates processed within Protofab. ~~The microscope is intended for room-temperature, dry inspection only and shall not be used for live electrical probing, destructive testing, or chemical exposure.~~ ▲== 2. Safety & EHS == ▲* PPE such as protective eyewear is mandatory except while using microscope eyepieces. Refer to facility rules for details. ▲* Do not stare at the LED light or reflected beam. ▲* Do not touch the lens revolver while it is moving. Doing so risks catching hands or fingers in the mechanism. ▲* Do not place your hand between the stage and the unit. Doing so may result in your hand getting caught and subsequent injury. == 3. Tool Application == Line 128 ⟶ 116: Do not attempt to fix any issue if you are not authorized. Contact facility personnel through portal and report the issue to be addresses. [[Category:SOP]] __FORCETOC__ __INDEX__ __NEWSECTIONLINK__

SOP Keyence VK X3000: Difference between revisions