ProtoFab - Recent changes [en]

UV Curing

Lorena — Mon, 31 Aug 2026 19:03:24 GMT

← Older revision		Revision as of 12:03, 31 August 2026
(3 intermediate revisions by the same user not shown)
Line 32:		Line 32:
	\|1000mW/cm2		\|1000mW/cm2
	\|100%		\|100%
	\|30 sec		\|60 sec
	\|1cm		\|1cm
	\|120°C/30 min		\|120°C/30 min
			\|-
			\|OPTOCAST 3410
			\|1500 mW/cm2
			\|100%
			\|60 sec
			\|1cm
			\|110°C/ 60 min
			\|-
			\|GA700H
			\|150 mW/cm2
			\|10%
			\|120 sec
			\|25mm
			\|100°C/ 60 min
	\|}		\|}

File:How to read UV intensity1.png

Lorena — Mon, 31 Aug 2026 18:24:29 GMT

← Older revision		Revision as of 11:24, 31 August 2026
Line 1:		Line 1:
			{{speedydelete\|User-requested courtesy deletion of broken upload showing error code 127}}
	How to read UV Intensities		How to read UV Intensities

File:ANUJ6170 UV Intensity Profile.png

Lorena — Mon, 31 Aug 2026 18:23:56 GMT

← Older revision		Revision as of 11:23, 31 August 2026
Line 1:		Line 1:
			{{speedydelete\|User-requested courtesy deletion of broken upload showing error code 127}}
	ANUJ6170+ANUJ6428 UV Intensity Profile		ANUJ6170+ANUJ6428 UV Intensity Profile

File:How to read UV intensity.png

Lorena — Mon, 31 Aug 2026 18:23:18 GMT

← Older revision		Revision as of 11:23, 31 August 2026
Line 1:		Line 1:
			{{speedydelete\|User-requested courtesy deletion of broken upload showing error code 127}}
	Graph for reading UV intensities		Graph for reading UV intensities

UV Curing

Lorena — Mon, 31 Aug 2026 18:21:37 GMT

← Older revision		Revision as of 11:21, 31 August 2026
Line 1:		Line 1:

	[[File:Intensities graph.png\|none\|thumb\|770x770px\|How to read UV Intensity Data]]
	Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.		Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.

File:Intensities graph.png

Lorena — Mon, 31 Aug 2026 18:21:07 GMT

← Older revision		Revision as of 11:21, 31 August 2026
Line 1:		Line 1:
			{{speedydelete\|User-requested courtesy deletion of broken upload showing error code 127}}
	UV Intensities graph		UV Intensities graph

UV Curing

Lorena — Mon, 31 Aug 2026 18:15:54 GMT

Reupload image

← Older revision		Revision as of 11:15, 31 August 2026
Line 1:		Line 1:
			[[File:Intensities graph.png\|none\|thumb\|770x770px\|How to read UV Intensity Data]]
	Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.		Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.

File:Intensities graph.png

Lorena — Mon, 31 Aug 2026 18:14:26 GMT

Lorena uploaded File:Intensities graph.png

New page

UV Intensities graph

UV Curing

Lorena — Mon, 31 Aug 2026 18:09:48 GMT

← Older revision		Revision as of 11:09, 31 August 2026
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
			Supplier's Recommended UV Intensity can be used as baseline. If another intensity is needed, us the following graphs to determine irradiation area and working distance.


	== UV Curing Recipes ==		== UV Curing Recipes ==
			Recipes for hybrid materials are for initial tack only. UV exposure and heat cure will typically be needed for 100% [https://www.masterbond.com/techtips/how-critical-crosslink-density-epoxies-optimizing-performance crosslink].
	{\| class="wikitable"		{\| class="wikitable"
			\|+UV Curing
	\|+
	!Material		!Material
	!Supplier's Recommended		!Supplier's Recommended
	UV Intensity		UV Intensity
			!Controller Output
	!UV Intensity Setting
	!Time		!Time
	!LED Distance From Sample		!LED Distance From Sample
Line 20:		Line 24:
	\|100mW/cm2		\|100mW/cm2
	\|100%		\|100%
	\|30 sec		\|60 sec
	\|1cm		\|1cm
	\|100°C / 30 min		\|100°C / 30 min
	\|-		\|-
			\|3553-LV-UTF_HM
	\|
			\|1000mW/cm2
	\|
			\|100%
	\|
			\|30 sec
	\|
	\|		\|1cm
			\|120°C/30 min
	\|
	\|}		\|}

File:How to read UV intensity1.png

Lorena — Mon, 31 Aug 2026 17:21:25 GMT

Lorena uploaded File:How to read UV intensity1.png

New page

How to read UV Intensities

File:ANUJ6170 UV Intensity Profile.png

Lorena — Mon, 31 Aug 2026 17:15:26 GMT

Lorena uploaded File:ANUJ6170 UV Intensity Profile.png

New page

ANUJ6170+ANUJ6428 UV Intensity Profile

File:How to read UV intensity.png

Lorena — Mon, 31 Aug 2026 16:57:53 GMT

Lorena uploaded File:How to read UV intensity.png

New page

Graph for reading UV intensities

Thermal Cure

Lorena — Mon, 31 Aug 2026 16:18:31 GMT

updated recipes table

← Older revision		Revision as of 09:18, 31 August 2026
Line 8:		Line 8:
	!Alternate 2		!Alternate 2
	!Alternate 3		!Alternate 3
			!Initial Tack
	\|-		\|-
	\|HYB-353ND		\|HYB-353ND
	\|100°C/30 min		\|100°C/30 min
			\|150°C/30 min
			\|80°C/ 1 hour
	\|		\|
			\|100mW/cm2 for 20 seconds
	\|
	\|
	\|-		\|-
	\|H70E		\|H70E
	\|150°C/60 min		\|150°C/60 min
			\|120°C/30min
	\|		\|
	\|		\|
Line 23:		Line 26:
	\|H20E		\|H20E
	\|150°C/60 min		\|150°C/60 min
			\|80°C/3 hours
	\|		\|
	\|		\|

UV Curing

Lorena — Mon, 31 Aug 2026 15:36:55 GMT

updated recipes table

← Older revision		Revision as of 08:36, 31 August 2026
(One intermediate revision by the same user not shown)
Line 3:		Line 3:
	\|+		\|+
	!Material		!Material
			!Supplier's Recommended
	!UV Intensity		UV Intensity
			!UV Intensity Setting
	!Time		!Time
	!LED Distance From Sample		!LED Distance From Sample
			!Additional Heat Cure(Temp°C/Time)
	\|-		\|-
	\|OG116-31		\|OG116-31
		⚫	\|
	\|100%		\|100%
	\|330 sec		\|330 sec
	\|1cm		\|1cm
		⚫	\|
		⚫	\|-
			\|HYB-353ND
			\|100mW/cm2
			\|100%
			\|30 sec
			\|1cm
			\|100°C / 30 min
	\|-		\|-
	\|		\|
	\|		\|
⚫	\|
⚫	\|
⚫	\|-
	\|		\|
	\|		\|

Main Page

Lorena — Fri, 28 Aug 2026 20:05:53 GMT

← Older revision		Revision as of 13:05, 28 August 2026
Line 70:		Line 70:
	*[[Recipes: Plasma Treatment\|Plasma Treatment]]		*[[Recipes: Plasma Treatment\|Plasma Treatment]]
	*[[Workpiece Fixturing]]		*[[Workpiece Fixturing]]
	*Thermal Cure		*[[Thermal Cure]]
	*[[Fluid Dispensing]]		*[[Fluid Dispensing]]
	*[[UV Curing]]		*[[UV Curing]]

UV Curing

Lorena — Fri, 28 Aug 2026 20:05:13 GMT

created uv curing recipes table

New page

== UV Curing Recipes ==
{| class="wikitable"
|+
!Material
!UV Intensity
!Time
!LED Distance From Sample
|-
|OG116-31
|100%
|330 sec
|1cm
|-
|
|
|
|
|-
|
|
|
|
|}

Bake Chamber (Yamato DKN Series Forced Convection Ovens)

Lorena — Fri, 28 Aug 2026 19:58:30 GMT

linked recipes to new page

← Older revision		Revision as of 12:58, 28 August 2026
Line 61:		Line 61:

	== Recipes ==		== Recipes ==
	[[Recipes: Thermal Process (Bake)]]		[[Thermal Cure\|Recipes: Thermal Process (Bake)]]

Thermal Cure

Lorena — Fri, 28 Aug 2026 19:57:23 GMT

created baking recipes table

New page

== Bake Recipes ==
The following are recommended cure times and temperatures based on manufacturer's technical data sheet information.
{| class="wikitable"
|+Bake Recipes
!Material
!Recommended Cure (Temp°C/Time)
!Alternate 1
!Alternate 2
!Alternate 3
|-
|HYB-353ND
|100°C/30 min
|
|
|
|-
|H70E
|150°C/60 min
|
|
|
|-
|H20E
|150°C/60 min
|
|
|
|}

Chemicals & MSDS

Arin2 — Fri, 28 Aug 2026 19:53:29 GMT

GA700H Docs

← Older revision		Revision as of 12:53, 28 August 2026
Line 37:		Line 37:
	\|[https://www.airgas.com/ Airgas]		\|[https://www.airgas.com/ Airgas]
	\|-		\|-
	\|GA700H ([[:File:~~E3810-GA700H LowRI adhesive~~ NTT-AT.pdf\|TDS]]/SDS)		\|GA700H ([[:File:NTT-AT GA700H TDS.pdf\|TDS]]/[[:File:NTT-AT GA700H MSDS.pdf\|SDS]])
	\|Epoxy		\|Epoxy
	\|Low RI adhesives for Optical Waveguides		\|Low RI adhesives for Optical Waveguides

File:NTT-AT GA700H MSDS.pdf

Arin2 — Fri, 28 Aug 2026 19:53:02 GMT

Arin2 uploaded File:NTT-AT GA700H MSDS.pdf NTT-AT GA700H MSDS

New page

== Summary ==
NTT-AT GA700H MSDS

Main Page

Lorena — Fri, 28 Aug 2026 19:52:32 GMT

renamed thermal recipe page

← Older revision		Revision as of 12:52, 28 August 2026
Line 70:		Line 70:
	*[[Recipes: Plasma Treatment\|Plasma Treatment]]		*[[Recipes: Plasma Treatment\|Plasma Treatment]]
	*[[Workpiece Fixturing]]		*[[Workpiece Fixturing]]
	*[[Thermal ~~Bake]]~~		*Thermal Cure
	*[[Fluid Dispensing]]		*[[Fluid Dispensing]]
	*[[UV Curing]]		*[[UV Curing]]

File:NTT-AT GA700H TDS.pdf

Arin2 — Fri, 28 Aug 2026 19:51:27 GMT

Arin2 uploaded File:NTT-AT GA700H TDS.pdf NTT-AT GA700H TDS

New page

== Summary ==
NTT-AT GA700H TDS

File:E3810-GA700H LowRI adhesive NTT-AT.pdf

Arin2 — Fri, 28 Aug 2026 19:50:35 GMT

Arin2 deleted page File:E3810-GA700H LowRI adhesive NTT-AT.pdf content was: "== Summary == GA700H TDS", and the only contributor was "Arin2" (talk)

Fluid Dispensing

Lorena — Fri, 28 Aug 2026 18:12:48 GMT

removed application column

← Older revision		Revision as of 11:12, 28 August 2026
Line 2:		Line 2:
	\|+Dispensing Recipes		\|+Dispensing Recipes
	!Material		!Material
	!Application
	!Syringe		!Syringe
	!Tip		!Tip
Line 11:		Line 10:
	\|-		\|-
	\|HYB353ND		\|HYB353ND
	\|Die Attach
	\|3CC		\|3CC
	\|30GA(LAVD)		\|30GA(LAVD)
Line 20:		Line 18:
	\|-		\|-
	\|H70E		\|H70E
	\|Die Attach
	\|3CC		\|3CC
	\|25GA(RED)		\|25GA(RED)
Line 29:		Line 26:
	\|-		\|-
	\|OG116-31		\|OG116-31
	\|Glob Top
	\|3CC		\|3CC
	\|25GA(RED)		\|25GA(RED)

Main Page

Lorena — Fri, 28 Aug 2026 17:55:18 GMT

← Older revision		Revision as of 10:55, 28 August 2026
(One intermediate revision by the same user not shown)
Line 70:		Line 70:
	*[[Recipes: Plasma Treatment\|Plasma Treatment]]		*[[Recipes: Plasma Treatment\|Plasma Treatment]]
	*[[Workpiece Fixturing]]		*[[Workpiece Fixturing]]
			*[[Thermal Bake]]
	*[[Fluid Dispensing]]		*[[Fluid Dispensing]]
			*[[UV Curing]]
	*[[General Instructional Documents]]		*[[General Instructional Documents]]

Precision Fluid Dispensing (Nordson EFD Ultimus I/II)

Lorena — Fri, 28 Aug 2026 15:59:40 GMT

Updated recipes link

← Older revision		Revision as of 08:59, 28 August 2026
Line 77:		Line 77:

	== Recipes ==		== Recipes ==
	[[Recipes: Fluid Dispensing]]		[[Fluid Dispensing\|Recipes: Fluid Dispensing]]

Fluid Dispensing

Lorena — Fri, 28 Aug 2026 15:53:40 GMT

Added dispensing recipe table

New page

{| class="wikitable"
|+Dispensing Recipes
!Material
!Application
!Syringe
!Tip
!Dispenser
!Mode
!Vacuum
!Pressure(PSI)
|-
|HYB353ND
|Die Attach
|3CC
|30GA(LAVD)
|Ultimus II
|Steady
|None
|14
|-
|H70E
|Die Attach
|3CC
|25GA(RED)
|Ultimus II
|Steady
|None
|14
|-
|OG116-31
|Glob Top
|3CC
|25GA(RED)
|Ultimus II
|Steady
|None
|12
|}

Main Page

Lorena — Fri, 28 Aug 2026 15:46:02 GMT

← Older revision		Revision as of 08:46, 28 August 2026
(One intermediate revision by the same user not shown)
Line 70:		Line 70:
	*[[Recipes: Plasma Treatment\|Plasma Treatment]]		*[[Recipes: Plasma Treatment\|Plasma Treatment]]
	*[[Workpiece Fixturing]]		*[[Workpiece Fixturing]]
	*[[~~Manual~~ ~~Assembly~~]]		*[[Fluid Dispensing]]
	*[[General Instructional Documents]]		*[[General Instructional Documents]]

Chemicals & MSDS

Arin2 — Tue, 25 Aug 2026 20:08:52 GMT

added MSDS

← Older revision		Revision as of 13:08, 25 August 2026
Line 67:		Line 67:
	\|[https://meridianadhesives.com/epoxy-technology/ EPOTEK]		\|[https://meridianadhesives.com/epoxy-technology/ EPOTEK]
	\|-		\|-
	\|3553-LV-UTF_HM ([[:File:OPTOCAST3553&-HM EMIUV.pdf\|TDS]]/SDS)		\|3553-LV-UTF_HM ([[:File:OPTOCAST3553&-HM EMIUV.pdf\|TDS]]/[[:File:OPTOCAST 3553-LV-UTF EMIUV MSDS.pdf\|SDS]])
	\|Epoxy		\|Epoxy
	\|Mid-RI adhesives for Optical Waveguides		\|Mid-RI adhesives for Optical Waveguides
Line 73:		Line 73:
	\|[https://emiuv.com/ EMIUV]		\|[https://emiuv.com/ EMIUV]
	\|-		\|-
	\|OPTOCAST 3410 ([[:File:OPTOCAST3410-EMIUV.pdf\|TDS]]/SDS)		\|OPTOCAST 3410 ([[:File:OPTOCAST3410-EMIUV.pdf\|TDS]]/[[:File:OPTOCAST 3410 EMIUV MSDS.pdf\|SDS]])
	\|Epoxy		\|Epoxy
	\|Low shrinkage low CTE UV and/or heat curable		\|Low shrinkage low CTE UV and/or heat curable

File:OPTOCAST 3410 EMIUV MSDS.pdf

Arin2 — Tue, 25 Aug 2026 20:08:16 GMT

Arin2 uploaded File:OPTOCAST 3410 EMIUV MSDS.pdf OPTOCAST 3410 EMIUV MSDS

New page

== Summary ==
OPTOCAST 3410 EMIUV MSDS

File:OPTOCAST 3553-LV-UTF EMIUV MSDS.pdf

Arin2 — Tue, 25 Aug 2026 20:07:04 GMT

Arin2 uploaded File:OPTOCAST 3553-LV-UTF EMIUV MSDS.pdf OPTOCAST 3553-LV-UTF EMIUV MSDS

New page

== Summary ==
OPTOCAST 3553-LV-UTF EMIUV MSDS

Chemicals & MSDS

Arin2 — Mon, 24 Aug 2026 21:44:03 GMT

Added NAMICS

← Older revision		Revision as of 14:44, 24 August 2026
Line 90:		Line 90:
	\|TIM		\|TIM
	\|[https://www.microsi.com/ ShinEtsuMicroSi]		\|[https://www.microsi.com/ ShinEtsuMicroSi]
			\|-
			\|UNIMEC H9890-6A ([[:File:NAMICS UNIMEC H9890-6A.pdf\|TDS]]/[[:File:H9890-6A MSDS.pdf\|SDS]])
			\|Low-temperature Sinter
			\|High thermal conductive paste
			\|Die Attach
			\|[https://namics-corp.com/low-temperature-pressure-less-sintering/#contact NAMICS]
	\|}		\|}

File:H9890-6A MSDS.pdf

Arin2 — Mon, 24 Aug 2026 21:43:09 GMT

Arin2 uploaded File:H9890-6A MSDS.pdf NAMICS H9890-6A MSDS

New page

== Summary ==
NAMICS H9890-6A MSDS

File:NAMICS UNIMEC H9890-6A.pdf

Arin2 — Mon, 24 Aug 2026 21:42:04 GMT

Arin2 uploaded File:NAMICS UNIMEC H9890-6A.pdf NAMICS UNIMEC H9890-6A TDS

New page

== Summary ==
NAMICS UNIMEC H9890-6A TDS

Plasma Treatment (Glen Technologies, Yield Engineering, R3A Asher)

Lorena — Wed, 19 Aug 2026 18:20:43 GMT

added a plasma cleaning before wire bonding article to knowledge base

← Older revision		Revision as of 11:20, 19 August 2026
Line 51:		Line 51:
	== Recipes ==		== Recipes ==
	[[Recipes: Plasma Treatment]]		[[Recipes: Plasma Treatment]]

			== Knowledge Base ==
			[https://www.piescientific.com/wp-content/uploads/2021/06/Plasma_Cleaning_in_chip_packaging.pdf?_gl=11v5175r_gcl_awR0NMLjE3ODcxNTY5MTkuQ2p3S0NBandxSlhVQmhCTkVpd0E4QmdHN2lZd0ZlVzJaWHVsMVpPa0dUZENBZHl1cGFfbS1nRFczTHFrNDZvZmIwSG9VTmNBN2lDS2J4b0N5U29RQXZEX0J3RQ.._gcl_auMTM2NTQ3NjQxMS4xNzg3MTU2OTE5_gaMjA0ODMwNDQ2MC4xNzg3MTU2OTE5_ga_XS0M4RLKFW*czE3ODcxNTY5MTgkbzEkZzEkdDE3ODcxNTY5MTkkajU5JGwwJGg3MjY3MDI1NDQ. Plasma Cleaning before Wire bonding]

File:Plasma Cleaning in chip packaging.pdf

Lorena — Wed, 19 Aug 2026 18:19:21 GMT

Lorena uploaded File:Plasma Cleaning in chip packaging.pdf

New page

plasma cleaning before wire bonding article

Work Holders, Jigs and Fixtures

Nic — Tue, 18 Aug 2026 20:20:45 GMT

Add FSC816 user manual

← Older revision		Revision as of 13:20, 18 August 2026
Line 48:		Line 48:
	\|Y		\|Y
	\|Y		\|Y
			\|[[Media:FandS CERDIP Fixture Design Client RevC Priced.pdf\|FSC816 - User Manual]]
	\|
	\|A fixture plate for holding 8 -16 pin CERDIP packages for F&S WB.		\|A fixture plate for holding 8 -16 pin CERDIP packages for F&S WB.
	\|}		\|}

File:FandS CERDIP Fixture Design Client RevC Priced.pdf

Nic — Tue, 18 Aug 2026 20:18:21 GMT

Nic uploaded File:FandS CERDIP Fixture Design Client RevC Priced.pdf

New page

Work Holders, Jigs and Fixtures

Nic — Tue, 18 Aug 2026 20:14:49 GMT

Add FSC816

@@ Line 40: / Line 40: @@
 |[[Media:FS5600 Thermal Vacuum Fixture Plate User Manual.pdf|FSTVP - User Manual]]
 |A fixturing plate which attaches to the F&S thermal-vac work stage.
 |}

Workpiece Fixturing

Nic — Mon, 10 Aug 2026 23:37:33 GMT

← Older revision		Revision as of 16:37, 10 August 2026
Line 1:		Line 1:
	[[Work Holders, Jigs and Fixtures\|List of Availbale Work Holders, Jigs and Fixtures]]		[[Work Holders, Jigs and Fixtures\|'''List of Availbale Work Holders, Jigs and Fixtures''']]
	{\| class="wikitable"		{\| class="wikitable"
	\|+Workpiece and Device Fixturing Instructional Documents		\|+Workpiece and Device Fixturing Instructional Documents

Work Holders, Jigs and Fixtures

Nic — Mon, 10 Aug 2026 23:36:35 GMT

← Older revision		Revision as of 16:36, 10 August 2026
Line 8:		Line 8:
	!Vacuum (Y/N)		!Vacuum (Y/N)
	!Heated (Y/N)		!Heated (Y/N)
	!Documentation
	!User Manual		!User Manual
	!Description and Uses		!Description and Uses
Line 19:		Line 18:
	\|Y		\|Y
	\|N		\|N
	\|
	\|[[Media:MTVWP - User Manual V0.pdf\|MTVWP- User Manual]]		\|[[Media:MTVWP - User Manual V0.pdf\|MTVWP- User Manual]]
	\|For imaging, inspection, alignment and other lab operations.		\|For imaging, inspection, alignment and other lab operations.
Line 30:		Line 28:
	\|Y		\|Y
	\|Y/N		\|Y/N
	\|
	\|[[Media:Modular Vacuum Work Plate User Manual Final.pdf\|MVWP - User Manual]]		\|[[Media:Modular Vacuum Work Plate User Manual Final.pdf\|MVWP - User Manual]]
	\|Modular vacuum work plate with interchanagble top surface.		\|Modular vacuum work plate with interchanagble top surface.
Line 41:		Line 38:
	\|Y		\|Y
	\|Y		\|Y
			\|[[Media:FS5600 Thermal Vacuum Fixture Plate User Manual.pdf\|FSTVP - User Manual]]
	\|
	\|
	\|A fixturing plate which attaches to the F&S thermal-vac work stage.		\|A fixturing plate which attaches to the F&S thermal-vac work stage.
	\|}		\|}

File:FS5600 Thermal Vacuum Fixture Plate User Manual.pdf

Nic — Mon, 10 Aug 2026 23:35:40 GMT

Nic uploaded File:FS5600 Thermal Vacuum Fixture Plate User Manual.pdf

New page

Work Holders, Jigs and Fixtures

Nic — Mon, 10 Aug 2026 23:30:48 GMT

← Older revision		Revision as of 16:30, 10 August 2026
Line 43:		Line 43:
	\|		\|
	\|		\|
	\|A fixturing plate which attaches to the F&S thermal-vac work ~~plate~~.		\|A fixturing plate which attaches to the F&S thermal-vac work stage.
	\|}		\|}